Accu-Chek Performa Control Solution

Accu-Chek Performa Control solution is used for quality control checks on Accu-Chek Performa meters and Accu-chek Performa test strips. The control pack contains two control solutions, one for hypoglycaemic range (glucose control solution 1, blue cap) one for the hyperglycaemic range (glucose control solution 2, red cap). The periodical checking of the performance of the blood glucose meter can be done by running a quality control check using Accu-Chek Performa control solutions in the following cases., when you open a new package of test strips, after you have replaced the battery, after you have cleaned your meter, if your blood test result does not agree with how you feel.

Information:

• 1 x 2.5 mL Control 1
• 1 x 2.5 mL Control 2
• For use with Performa Nano, Connect, Combo, Insight.

Benefits : 

• Suitable for self-testing
• For checking the performance of the blood glucose meter.
• Ensuring the results of glucose monitor to be dependable.

How to use : 

• For performing a control test you need the meter, a test strip, and control solution Level 1 or Level 2.
• Check the use by date on the test strip container. Do not use test strips past the use by date.
• Insert the test strip into the meter in the direction of the arrows.
• Place the meter on a flat surface.
• Select the control solution to test. You will enter the level later in the test.
• Remove the cap from the control solution bottle.
• Wipe the tip of the bottle with a tissue.
• Squeeze the bottle until a tiny drop forms at the tip.
• When you see flash, there is enough control solution in the test strip.
• Wipe the tip of the bottle with a tissue. Cap the bottle tightly
• Touch the drop to the front edge of the yellow window of the test strip until you see flash.
• Do not put control solution on top of the test strip.
• Refer to the package insert that comes with the control solution or see the User's Manual for your meter for instructions.